Thrust ball bearing

Thrust ball bearings are designed to withstand thrust loads at high speeds, and consist of washer-like rings with ball rolling grooves. Because the ferrule is seat cushion shape, thrust ball bearings are divided into two types: flat base cushion type and self-aligning spherical cushion type. In addition, this type of bearing can support axial loads but not radial loads. According to the force situation, it is divided into one-way thrust ball bearings and two-way thrust ball bearings. One-way thrust ball bearings can withstand unidirectional axial loads. Two-way thrust ball bearings can withstand two-way axial loads, of which the collar and the shaft cooperate. The bearing with a spherical mounting surface has a self-aligning performance, which can reduce the impact of mounting errors. Thrust ball bearings cannot bear radial loads, and the limiting speed is low. 1. Available in unidirectional and bidirectional types 2. In order to tolerate installation errors, whether it is unidirectional or bidirectional, you can choose spherical self-aligning spherical seat cushion type or spherical seat type. 3.High-quality steel ―Using ultra-clean steel that can extend bearing life by up to 80% 4. High grease technology ― Lubricant technology can extend the life of grease and improve bearing performance 5. High-grade steel ball-quiet and smooth when rotating at high speed 6. Use the ferrule in the option to allow installation errors. use: Thrust ball bearings are only suitable for parts that bear axial load on one side and have low speed, such as crane hooks, vertical water pumps, vertical centrifuges, jacks, low speed reducers, etc. The bearing's shaft washer, seat washer and rolling element are separated and can be assembled and disassembled separately.